254MM (10”) COMPOUND MITRE SAW
254MM (10”) COMPOUND MITRE SAW
23
254MM (10”) COMPOUND MITRE SAW
23
254MM (10”) COMPOUND MITRE SAW
OPERATION INSTRUCTIONS
Warning:
Before using your mitre
saw be sure to read the instruction
manual carefully.
Operating instructions
1. Know your mitre saw.
Read and understand the Operator’s Manual
and labels affixed to the tool. Learn its
application and limitations as well as the
potential hazards specific to this tool. To avoid
injury from accidental contact with moving
parts, do not lay out, assemble or set up work
on the mitre saw.
2. Electrical connection
Your mitre saw has a precision-built electric
motor and it should only be connected to a 230
V, 50 Hz. Power supply (normal household
current). Do not operate on direct current
(DC). This large voltage drop will cause a loss
of power that will overheat the motor. If your
mitre saw does not operate when plugged into
an outlet, have a professional electrician check
the power supply.
Warning:
Avoid accidental starting.
Make sure the switch is in the OFF
position before plugging the mitre saw into a
power outlet.
3. Body and hand position
Warning:
Never place hands near the
cutting area. Proper positioning of your
body and hands when operating the mitre
saw will make cutting easier and safer.
Keep children away. Keep all visitors at a
safe distance from the mitre saw. Make
sure bystanders are clear of the saw and
workpiece.
Don’t force the saw. It will do the job better
and safer at its designed rate.
