Erbauer ERB125Y, Manual, Page: 6 / 20

You are advised to consider the risks associated with the materials you are working
with and to reduce the risk of exposure. You should:
- Work in a well-ventilated area.
- Work with approved safety equipment, such as those dust masks that are specially
designed to filter microscopic particles.
ADDITIONAL SAFETY INSTRUCTIONS FOR YOUR WALL
CHASER
1.Maintain the tool with care
1) Keep cutting equipment sharp and clean, so you will achieve a good result, safely.
2) Follow the directions for lubrication and replacement of parts.
3) Inspect the power cord regularly and have a damaged cord repaired by an authorized
service agent.
4) Inspect extension cords regularly, and replace any damaged cords.
5) Keep handgrips dry, clean and free from grease and oil.
2. Remove adjustment tools and spanners
Make it a habit to never switch on the machine, until you have checked that any adjusting
tools or spanners have been removed.
3. Avoid unintentional starting
Never carry a connected machine with a finger on the switch. Make certain that the
switch is in the “OFF” position, before connecting the machine to the power supply.
4. Use outdoor extension cords
Whenever you use the tool outdoors, always use extension cords specifically designed
for outdoor use.
5. Stay alert
Watch what you are doing. Use your common sense. Do not use the tool when you are
tired.
6. Inspect damaged parts
1) Before making further use of the tool, if any safety feature such as a protective cover
or other part has been damaged, make absolutely certain that the machine is still safe
to use, and that the part can still perform its protective function.
2) Check the alignment and free movement of moving parts, possible breakage of parts,
attachments and any irregularities that could adversely affect operation.
3) A safety cover or any other damaged part should be properly repaired or replaced by
an authorized service agent, unless otherwise directed in these directions.
4) Have any defective switches replaced by an authorised service agent.
5) Never use the tool whenever the tool cannot be switched “ON” or “OFF” with its own
switch.