Erbauer ERB112BTE, Handbook, Page: 14 / 19

TROUBLESHOOTING
1. Grinder will not start
If your grinder will not start check the power at
the mains plug.
2. Wheel wobbles or vibrates
Check that the lock-nut is tight. Check that the
wheel is correctly located on the shaft and locat-
ing washer. If excessive pressure has been used
or the wheel has “caught”, it may be damaged,
this can cause excessive vibration. DO NOT USE
if there is any evidence that the wheel is dam-
aged. Remove it and replace with a new wheel.
Dispose of old wheels sensibly.
3. Wheel leaves rough finish
Too much pressure on the wheel can cause a poor
surface finish. If working with aluminum or simi-
lar soft alloy, the wheel will soon become clogged
and will not grind effectively.
There are no other user serviceable parts in your
bench grinder.
ENVIRONMENT PROTECTION
Waste electrical products should not be
disposed of with household waste. Please
recycle where facilities exist. For further
information visit www.recycle-more.co.uk.