background image

115mm ANGLE GRINDER

GUARANTEE

This                 product carries a Screwfix Direct Ltd guarantee of 24 months. If your 

product  develops  a  fault  within  this  period,  you  should,  in  the  first  instance  contact 

Screwfix Direct Ltd on Freephone 0500 41 41 41.  If the fault occurs within the first 24 

months, you may return the goods for a full refund or we will repair or replace the goods 

if you prefer. When repair is not practical or identical goods are not available, alternative 

goods of similar specification and quality will usually be provided but, failing this, you 

will be offered a partial or full refund depending on the time period since purchase. 

This guarantee specifically excludes losses caused due to:

- Fair wear and tear

- Misuse or abuse

- Lack of routine maintenance

- Failure of consumable items (such as batteries)

- Accidental damage

- Cosmetic damage

- Failure to follow manufacturer’s guidelines

- Loss of use of the goods

- Repairs attempted by anyone, unless authorised by Screwfix Direct Ltd.

This guarantee does not affect your statutory rights. This guarantee is only valid in the UK.

For  further  technical  advice  and  spare  parts  please  contact  the  customer  helpline 

number on 0845 607 6380.

Congratulations  on  your  purchase  of  a  quality  power  tool  from  Screwfix 

Direct Ltd.  This product should give you reliable service but for your peace 

of mind this                power tool does carry a 24-month guarantee, the terms 

of which are detailed below.

If this product develops a fault within the guarantee period contact Screwfix 

Direct Ltd on Freephone 0500 41 41 41. 

Please  retain  this  handbook  in  case  you  need  to  refer  to  safety,  care  or 

guarantee information in the future.

PGA115P1.2 ERB017GRD-M-070613.indd   3

2007-6-14   17:10:33

Summary of Contents for ERB017GRD

















Reviews: