Erbauer 3663602795193, Original Instructions Manual

Page: 10 / 32

10
e) ALWAYS use this product when standing on a firm
and secure platform or the ground. (DO NOT USE ON
LADDERS OR STEPS)
f) The power tool shall not be wet or applied in wet
environment.
g) The voltage of the power source must agree with the
voltage specified on the rating label of the machine.
h) Check the product, its power cord and plug as well as
accessories for damage before each use. Do not use
the product if it is damaged or shows wear.
i) Double check that the accessories and attachments
are properly fixed. A short-time test running in no-load
condition will be helpful to identify any problems.
j) Use suitable detectors to determine if utility lines are
hidden in the work area or call the local utility company
for assistance. Contact with electric lines can lead to
fire and electric shock. Damaging a gas line can lead
to explosion. Penetrating a water line causes property
damage or may cause an electric shock.
k) Keep the handles dry to ensure safe control. Grip the
product securely with two hands so you have full control
at all times.
l) The chisel, chuck and the work piece can become very
hot while working. Do not touch them before they have
cooled down.
m) Ensure that the air vents are always unobstructed
and clear. Clean them if necessary with a soft brush.
Blocked air vents may lead to overheating and damage
the product.
n) Switch off the power tool immediately when the bit
jams. The chisel jams when: the power tool is subject
to overload or it becomes wedged in the workpiece.
Switch the power tool off and then loosen the bit.
o) Switch the product off immediately if you are disturbed
while working by other people entering the working
area. Always let the product come to complete stop
before putting it down.