Erbauer 3663602418252 Original Instructions Manual Download Page 10

19

18

 

ASSEMBLY

01

 

UNPACKING

• 

Unpack all parts and lay them on a flat, stable surface.

•  Remove all packing materials and shipping devices, if applicable.
• 

Make sure the delivery contents are complete and free of any damage. If you find that parts 

are missing or show damage do not use the product but contact your dealer. Using an 

incomplete or damaged product represents a hazard to people and property.

•  Ensure that you have all the accessories and tools needed for assembly and operation. 

This also includes suitable personal protective equipment

WARNING!

 

The product and the packaging are not children’s toys! 

Children must not play with plastic bags, sheets and small parts! There is a 

danger of choking and suffocation!

02

 ASSEMBLY

INSTALL THE HEDGE TRIMMER HEAD ONTO THE TELESCOPIC TUBE (FIG. A)

Slide the hedge trimmer head(2) onto the tube. 
Align the arrow mark on the handle section with the groove on the trimmer head

.

Tighten the locking sleeve(4) by turning it clockwise to attach the hedge trimmer head to
the tube.

BLADE COVER (FIG. B)

Remove the blade cover(13) from the cutting device before use.

CHARGING YOUR BATTERY PACK

The battery has been shipped in a low charge condition. Charge it fully before first use. 

Refer to the charger instruction manual for the details.

TO REMOVE OR INSTALL THE BATTERY PACK (FIG. C1, C2)

Depress the battery pack release button (10) to release and slide the battery pack (12) 

out from your tool. (Fig. C1)
After recharge, slide the battery pack (12) back into your tool. A simple push and slight 

pressure will be sufficient.

BATTERY PACK POWER BAR

The Li-Ion battery pack (12) is equipped with a POWER BAR (11) which is used to give 

an indication of the battery pack’s remaining charge. Press the POWER BAR button (11) 

to check battery charge as below. The LED will stay lit for approximately 5 seconds.

11

76-100% Charge

51-75% Charge

26-50% Charge

5-25% Charge

under 5% Charge

Flash

On

Off

Summary of Contents for 3663602418252

















Reviews: