Fit the cylinder and check function of
the lock (as per steps
a
-
c
below):
Please note:
This
is required for the
top, centre and
bottom latches.
If so, please remove the mounting bracket from
the handle box (situated underneath the
external handle in the holding pocket) and using
the two fixing screws (in the handle box) secure
the plate onto the internal face of the door, in
the highlighted holes.
1.
Insert the multipoint lock into the
prepared door and fasten with
appropriate screws
.
2.
Set latches to left or right handed by
pulling the latch outwards and twisting
to the correct position.
3.
a.
Turn the thumbturn, check
all hooks and the centre
deadbolt retract.
b.
Return the cylinder to the
normal position.
c.
Press the trigger on the
centre gearbox to fire the
hooks and centre deadbolt.
Please separate installation instructions for
the TouchKey door handle and cylinder. We
recommend these are fitted on site during
door installation.
4.
You may choose to fit the handle
mounting bracket prior to the door
reaching the site.
MPL LOCK PREPARATION
