ERA TEVIN CV, Service Instruction, Page: 6 / 16

6
EN
CARE AND MAINTENANCE
In order to eliminate dirt inside the fan, it is required to:
1. disconnect the fan from the electrical network;
2. dismantle the fan;
3. in case of severe contamination, remove the blades with a key;
4. wipe all the details with a wet piece of cloth dipped in a small amount of acetone, you should be
careful: you can not wet the motor.
5. After all the fan elements are dry, you need to reassemble it (the fan blades are fixed on the motor
axis with the help of a space washer from the expansion bolt, and therefore this bolt is not screwed
to the stop).
6. Fix the fan at the destination.
7. Connect the fan to the electricity mains.
MAINTENANCE
In normal operation, the fan does not require maintenance, but only a performance monitoring.
The serviceability of the fan is determined by external inspection, then switching on and checking the
supply and exhaust air flow.
TRANSPORTATION AND STORAGE RULES
Shelf life - 5 years from the date of manufacture.
• Transportation of fans in the package is made by any kind of covered land, air and sea transport
with the rules of transportation applicable for this type of cargo.
• When transporting, any possible impacts and movements of the fan packaging inside the vehicle
must be excluded.
• The fan should be stored in the manufacturer’s packaging in a heated ventilated room at a
temperature from +5 to + 40 ° С and relative humidity up to 80%.
Utilization
Upon expiration of the service life the fan must be disposed of in accordance with the rules,
regulations and methods in force at the disposal site.
Shelf life - 5 years.
MANUFACTURER’S WARRANTY
Warranty period of operation – 12 months from the date of sale of the fan through the retail
network. Date of sale with the seal of the store is marked on the tear-off coupon for warranty repair
of this manual.
During the warranty period, the manufacturer undertakes to correct product defects or replace it, if
the defects did not arise as a result of a violation by the buyer of the rules for using products or their
storage. Warranty repair of the fan is made by the manufacturer upon presentation of the warranty
card, and post warranty - in specialized repair shops.
The manufacturer does not accept claims for incompleteness and mechanical damage to the fan
after its sale.
In case of absence of a store seal stamped on a tear-off coupon with a date of sale, the warranty
period is calculated from the date of manufacture of the fan.
The manufacturer is not liable (warranty does not apply) for fan malfunctions in the following cases:
• if the electrical appliance is not properly connected;
• non-compliance with the rules of storage, operation and transportation;
• ingestion of foreign objects, substances, liquids, animals;
• disassembly of the fan by a consumer or an unauthorized person;
• natural disasters, fires.
INFORMATION CONCERNING MANDATORY CONFIRMATION OF GOODS CORRESPONDENCE
The goods meet the requirements:
TR CU 004/2011 «On safety of low voltage equipment»,
TR CU 020/2011 «Electromagnetic compatibility of technical means».
MANUFACTURER
ZIRKON, LLC, address: cab. No. 24, 48 Universitetskaya Str., the city of Cheboksary, the Chuvash
Republic
Manufactured: ZIRKON, LLC, Russia, according to the order of ERA, LLC,
contact h. 17, Novoselkovskaya Str., the city of Ryazan, Russia, 390047