ERA TEVIN CV, Service Instruction, Page: 5 / 16

5
EN
Характеристики CV-150 CV-160 CV-200 CV-250 CV-300
Diameter, mm 150 160 200 250 300
Power consumption, W 30 30 30 42 58
Productive capacity, m
3
/h 270 280 350 600 1000
Pressure, Pa 40 50 55 65 75
Noise level, dB(A) 50 51 54 57 62
Voltage, V/Hz 230/50
Engine speed, obr./ min. 1300
Current consumption, А 0,19 0,20 0,25 0,30 0,40
Work temperature,
о
С 42
Mass, kg 1.40 1.50 1.57 2.78 4.21
Degree of protection, IP X2
Insulation class I
Bearing type Slide
Material Galvanized steel
Dimensions of an individual box:
length, mm
175 175 215 260 320
Width, mm 165 165 210 260 320
Heights, mm 205 205 240 300 320
INSTALLATION AND PREPARATION FOR WORK
Due to possible damage during transportation after unpacking the fan, you need to check:
• power line (for the presence of cracks on the isolating material);
• fan case (for the presence of dents, deformations), fan blades should not be in contact with the case.
If the above damage is not detected, you can proceed with the installation of the fan at the destination:
• prepare electrical wiring;
• fix the fan in the ventilation duct;
• attach the nozzles to the case;
• tighten the nozzles with the trap strap so that the strap was in the grooves on the case.
CV fans are installed:
• directly in the building wall (part of the canal);
• between the ventilation ducts.
CONNECTION SCHEME