www.equiptec.co
April
2022
Monkey Assembly Instructions MX21 - SB 1.0
55
Step 2 - Fit Rear Go-Base Section
1. Remove the orange Go-Base Castor
Bracket Covers (retain bolts for
refitting later)
2. Lift the MX21 with forklift and place
safety blocks under the fork pockets to
prevent the unit accidentally lowering
3. Place the Rear Go-Base assembly
under the MX21 chassis, insert 3 bolts
on both sides (as per arrows in detailed
view) and tighten
Fastening List (in Go-Base pack)
4 x M8 x 25 Bolt
2 x M8 x 30mm Bolt
6 x M8 Nyloc Nut
12 x M8 Flat Washer
5
M8 x 25mm
Bolt
M8 x 30mm Bolt
