Adjusting the rack to fit your backpack blower
Adjust the rack so the blower fits in as tight as possible.
•
You will want to mount your rack onto your open trailer to make it easy to adjust without moving
around. Enclosed trailer applications it may be easier to adjust the rack to your blower first.
•
Use thread lock and tighten all adjustment screws as tight as possible after adjusting.
•
Note: If you wish to achieve maximum security bolt/screw heads can be filled with epoxy.
The securing bar can be adjusted
Up and down here, if this doesn’t
provide enough adjustment to hold
the blower down tight the whole
rod can be lowered in the base.
Adjust here if the
top doesn’t
provide enough
movement.
The front restraint slides on both
sides, push the restraint tight
against the blower.
The tube holder support adjusts up
and down, it can also be pivoted to
the back of the rack, this can be
useful if you want to mount the
rack on the side of an open trailer
all the way at the front.
Lock height can be adjusted here.
Adjust the height of the lock so
the blower is held in very tight
with the securing bar level.
The back support bracket
adjusts up and down.
The securing bar must be
holding down with some
force.
The front restraint must
be adjusted to hold the
blower in tight.
