www.prolight.co.uk
Stage Haze 1500
User Manual
5
On startup the LCD display will show the heating percentage up to completion
‘heating 0%’
to
‘heating
100%’
whilst the unit is heating up and performing its startup clean cycle (approx. 3 minutes).
Once the heating up is finished it will then display
‘Machine ready’
, which means the unit
is ready for use.
Timer mode:
Press the
“FUNCTION”
button on the unit to display
‘Wait Time Set Mode:’
, you can now adjust the
interval time from 1s to 600s by using the and buttons.
Press the
“FUNCTION”
button to display
‘Start Time Set Mode:’
, you can now adjust the haze output time
from 1s to 600s by using the and buttons.
Press the
“FUNCTION”
button to display
‘Timer Smoke Volume Out:’
, you can now adjust the output
volume from 0% to 100% by using the and buttons.
Press the
“FUNCTION”
button to display
‘Fan Adjusting Volume:’
, you can now adjust the fan volume
from 0% to 100% by using the and buttons.
Once set you can then use the timer button to enable this mode.
The display will show
‘Haze wait: ___S
Haze start: ___S’
with the settings already applied.
Press the
button once to stop haze output.
Manual mode:
Press the button to start manual haze.
The display will show the current settings eg
‘*Haze 50% Fan 100%’
.
You will notice an * will appear next to the word
*Haze
, you can now adjust the setting accordingly using
the and buttons. If you want to adjust the
Fan
, simply press the FUNCTION button and the * will
appear next to the word
*Fan
you can now adjust the setting accordingly using the and buttons.
Press the
button once to stop haze output.
Please note: This mode is for continuous haze.
button:
Press the button until the LCD display shows
‘Do not off in clean 300S’
. The unit will now perform
its cleaning cycle. Once the LCD display shows
‘To turn off the POWER!!!’
, you can then disconnect the
unit from the mains power supply.
Operating instructions
Operating instructions
VOLUME
PUMP/FAN
