Key seek function
In this mode you can select any of the individual animations from the selected folder.
To do this, press the
“MODE“
button to show
“KEY SEEK”
on the LCD display screen.
Now press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to browse through the
animations or beam list folders. Please make sure that you have the correct folder selected first
from the
“FOLDER SELECT”
option.
Once the animation or beam pattern has been selected, that pattern will be repeated over and
over again until the animation or mode has been changed.
System set function
In this function, you can set the colour output, change the X & Y axis and the audio setting.
To access this function, press the
“MODE”
button to show
“SYSTEM SET”
on the LCD display
screen. Now press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to select one of
the following;
1)
Colour setting mode
2)
Audio setting
3)
Phasic setting (orientation)
When the chosen setting has been selected, use the
“UP”
and
“DOWN”
buttons to browse the
setting options;
Colour setting options:
(auto and sound active modes only)
1)
RGY
2)
Yellow
3)
RG
Audio setting options:
Controls the amount of movements from low to high
Phasic setting (orientation):
X +, Y +
= Right facing
X -, Y +
= Left facing
X -, Y -
= Flip upside down, Right facing
X +, Y -
= Flip upside down, Left facing
Equinox Ripper Laser
Operation modes
