www.prolight.co.uk
Maxi Batt
User Manual
7
Operating instructions
Master/slave mode:
To set the master unit select your desired program (colour change, colour fade, auto, sound
active or strobe. To set the other units in slave mode, press the
“MENU”
button on the front of the unit to
show
SLAu
on the LED display. Press the
“ENTER”
button to confirm the setting. The unit will now run
in sequence with the master unit. To exit out of any of the above options, press the
“MENU”
button.
Please ensure that all slave units are set to the same DMX channel mode as the master unit.
Auto mode:
To access auto mode, press the
“MENU”
button on the rear of the unit to show
dEno
on the LED
display. The fixture will now run through all its built-in programs
To exit out of any of the above options, press the
“MENU”
button.
Sound mode:
To access sound mode, press the
“MENU”
button on the rear of the unit to show
Soud
on the LED
display. The fixture will now run in sound mode.
To exit out of any of the above options, press the
“MENU”
button.
