www.prolight.co.uk
Maxi Batt
User Manual
6
Colour fade mode 1:
To access colour fade mode 1, press the
“MENU”
button on the rear of the unit to show
CF01
on the LED display. Now press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to set the
speed between
CF01
~
CF99
. Press the
“ENTER”
button to confirm the setting.
To exit out of any of the above options, press the
“MENU”
button.
Value: 01 - 99 (01 = slow speed, 99 = fast speed)
Colour change mode:
To access colour change mode, press the
“MENU”
button on the rear of the unit to show
CJ01
on the LED display. Now press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to set the
speed between
CJ01
~
CJ99
. Press the
“ENTER”
button to confirm the setting.
To exit out of any of the above options, press the
“MENU”
button.
Value: 01 - 99 (01 = slow speed, 99 = fast speed)
Colour fade mode 2:
To access colour fade mode 2, press the
“MENU”
button on the rear of the unit to show
CP01
on the LED display. Now press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to set the
speed between
CP01
~
CP99
. Press the
“ENTER”
button to confirm the setting.
To exit out of any of the above options, press the
“MENU”
button.
Value: 01 - 99 (01 = slow speed, 99 = fast speed)
Strobe mode:
To access strobe mode, press the
“MENU”
button on the rear of the unit to show
Ct01
on the LED display. Now press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to set the
speed between
Ct01
~
Ct99
. Press the
“ENTER”
button to confirm the setting.
To exit out of any of the above options, press the
“MENU”
button.
Value: 01 - 99 (01 = slow speed, 99 = fast speed)
Manual dimming mode:
To access the manual dimming mode, press the
“MENU”
button until the display shows
rGb
on the
LED display. Use the
“UP”
and
“DOWN”
buttons to select the required brightness of red from
r.000
~
r.255
. Press the
“ENTER”
button followed by the
“MENU”
button and repeat for
g
(green),
b
(blue)
and
y
(white). Press the
“ENTER”
button to confirm the setting.
Value: 000 - 255 (000 = low brightness, 255 = high brightness)
To exit out of any of the above options, press the
“MENU”
button.
