Equinox Systems EQLED136, User Manual

Page: 7 / 12

www.prolight.co.uk Microbar Multi System User Manual
7
Sound/sound sensitivity:
To access the sound modes, press the “MENU” button on the rear of the unit to show
Sou
on the LED display. Now press the “ENTER” button and use the “UP” and “DOWN” buttons to choose
between
SouP
(Par - Sound active),
SouF
(Effect - Sound active) or
SouN
(Par & Effect - Sound
active). Press the “ENTER” button to confirm the setting and use the “UP” and “DOWN” buttons to
choose the sound program between
SP01
~
SP13
(Par - Sound active),
SF01
~
SF07
(Effect -
Sound active) or
Sn01
~
Sn10
(Par & Effect - Sound active).
Press the “ENTER” button to confirm the setting.
To exit out of any of the above options, press the “MENU” button.
To adjust the sound sensitivity, press the “MENU” button on the rear of the unit to show
Sys
on the
LED display. Now press the “ENTER” button to display
ASEN
. Press the “ENTER” button and use the
“UP” and “DOWN” buttons to choose between
Sn.01
~
Sn.04
.
Press the “ENTER” button to confirm the setting.
To exit out of any of the above options, press the “MENU” button.
Manual mode:
To access manual mode, press the “MENU” button on the rear of the unit to show
CoL
on the LED
display. Now press the “ENTER” button to display
CoLo
. Now press the “ENTER” button and use the
“UP” and “DOWN” buttons to choose between
r.000
~
r.255
(Red). Repeat for
G
(Green),
b
(Blue)
and
U
(White). Press the “ENTER” button to confirm the setting and use the “UP” and “DOWN” buttons
to choose the strobe speed between
S. 00
~
S. 32
. Finally press the “ENTER” button to confirm the
setting and use the “UP” and “DOWN” buttons to choose the motor speed between
N. 00
~
N. 09
.
To exit out of any of the above options, press the “MENU” button.