changes press the
MENU
button again. Press and hold the
MENU
button
for one second or wait for one minute to go back to the main menu.
Sound Sense
To select Sound Sense, press the ENTER button and then use the
UP
and
DOWN
buttons to adjust the sound sensitivity from 0 to 100. Press the
ENTER
button to confirm.
To go back to the functions without any changes press
the
MENU
button again. Press and hold the
MENU
button for one second
or wait for one minute to go back to the main menu.
Pan Inverse
To select Pan Inverse, press the
ENTER
button to confirm. Use the
UP
and
DOWN
buttons to select No (normal) or Yes (Pan Inverse). Press the
ENTER
button to confirm.
To go back to the functions without any changes press
the
MENU
button again. Press and hold the
MENU
button for one second
or wait for one minute to go back to the main menu.
Tilt Inverse
To select Tilt Inverse, press the
ENTER
button to confirm. Use the
UP
and
DOWN
buttons to select
No
(normal) or
Yes
(Tilt Inverse). Press the
ENTER
button to confirm.
To go back to the functions without any changes press
the
MENU
button again. Press and hold the
MENU
button for one second
or wait for one minute to go back to the main menu.
Back light
To select back light state, use the
UP/DOWN
buttons to select
No
(Display
always on) or
Yes
(Display goes off after one minute after existing menu
mode), press the ENTER button to confirm.
To go back to the functions
without any changes press the
MENU
button again. Press and hold the
MENU
button for one second or wait for one minute to go back to the
main menu.
Display Inverse
To select Display Inverse, use the UP/DOWN buttons to select
No
(normal
display) or
Yes
(inverse display), press the
ENTER
button to confirm.
To go back to the functions without any changes press the
MENU
button
again. Press and hold the
MENU
button for one second to go back to the
main menu.
Focus adjust
Select Focus, press the
ENTER
button to confirm. Adjust the value from 0 to
255 via the
UP/DOWN
buttons and press the
ENTER
to confirm. To go back to
the
functions without any changes press the
MENU
button again. Press
and hold the
MENU
button for one second to go back to the main menu.
Auto Test
To select Auto Test, press the
ENTER
button to confirm, the unit will run the
built-in programs automatically to test the pan, tilt, colour, gobo, gobo rotation,
prism, prism rotation, iris and focus.
Press and hold the
MENU
button for
one second to go back to the main menu.
Unit Temperature
To select Temperature Unit, press the
ENTER
button to confirm. Use the
UP
and
DOWN
buttons to select
℃
or
℉
, and press the ENTER button to
confirm. To go back to the
functions without any changes press the
MENU
button again. Press and hold the
MENU
button for one second to go back
to the main menu.
Fixture time
To select Fixture time, press the
ENTER
button to confirm, the fixture working
hours will show on the display. To go back to the
functions without any
changes press the
MENU
button again. Press and hold the
MENU
button
for one second to go back to the main menu.
