1. Safety Instruction
WARNING
P
lease keep this User Guide for future consultation. If you sell the unit to another
user be sure that they also receive this.
Unpack and check carefully that there is no transportation damage before using
the unit.
!
Before operating, ensure that the voltage and frequency of the power supply
match the power requirements of the unit.
!
It’s important to ground the yellow/green conductor to earth in order to avoid
electric shock.
!
The unit is for indoor use only. Use only in a dry location.
!
The unit must be installed in a location with adequate ventilation, at least 50cm
from adjacent surfaces. Be sure that no ventilation slots are blocked.
!
Disconnect the mains power before replacement or servicing.
!
Make sure there are no flammable materials close to the unit while operating as
they may cause a fire hazard.
!
Always use a safety cable when installing this unit. Do not carry the unit with its
head only; always carry it using the base.
!
The maximum ambient temperature is: 40°. Don’t operate it where the
temperature is higher than this.
!
In the event of a serious operating problem stop using the unit immediately.
Never try to repair the unit by yourself. Repairs carried out by unskilled people
can lead to damage or malfunction.
Please contact the nearest authorized technical assistance center. Always use
the same type spare parts.
!
Do not touch any power cables during operation as the high voltage may cause
an electric shock.
Warning
!
To prevent or reduce the risk of electrical shock or fire, do not expose the unit to
rain or moisture.
Do not open the unit within five minutes after switching off.
!
The housing and lenses must be replaced if they are visibly damaged.
!
This lighting fixture is for professional use only - it is not designed for or suitable
for household use. The product must be installed by a qualified technician in
accordance with local territory regulations. The safety of the installation is the
responsibility of the installer. The fixture presents risks of severe injury or death
due to fire hazards, electric shock
and falls.
!
Warning! Risk Group 2 LED product according to EN 62471. Do not view the
light output with optical instruments or any device that may concentrate the
beam.
!
WARRANTY: One year from date of purchase.
Installation
The unit should be mounted via its screw holes onto the bracket. Always ensure
that the unit is firmly fixed to avoid vibration and slipping while operating. Make
sure that the structure to which you are attaching the unit to is secure and is able
to support a weight of 10 times of the unit’s weight. Always use a safety cable
that can hold 12 times of the weight of the unit when installing the fixture.
The equipment must be installed by professionals and it must be installed in a
place where is out of the reach of people and no one can pass by or under it.
2. Technical Specifications
"
DMX Control: 15 channels
"
Motorized focus via DMX control
"
Operation Modes: DMX, Master/Slave, Sound Active
"
Built-in programs under Master/Slave triggered by music
"
Smooth 0
‐
100% dimming and variable strobe speeds
"
One rotating gobo wheel with seven gobos and white
Please read the instructions carefully as they include important
information about installation, usage and maintenance.
