Equator Super Washer 824N, Owner'S Manual

Page: 16 / 23

2
Press this button to select once of the four positions, then select the additional
options for your favorite washing cycles, then press Start/Pause button to run this
program, and this program will be memorized. If you want to run the memorized
program later, press this button to select one of them, then press Start/Pause button.
Turn the dial to align “OFF” to cancel the memory operation.
Press this button to turn on, or off the chime before you start the washing cycle.
Press this button to select the delay time from 1 to 24 hours in one hour increments
before the wash cycle started
To display the selected program, such as the water selection, spin speed,
remaining time, rinse times, water level and error messages.
Press this selection button to add one more rinse cycle to the selected washing program.
Press this selection button to eliminate the spin function. This function will keep the
laundry in the rinse water after the last rinse cycle is finished. Press this button again,
it will drain out the water and proceed to last spin cycle.
Press this button to add a prewash cycle to the selected washing program.
This cycle is helpful to clean heavy soiled clothes
Turn dial to point to one of the 12 programs depending on the load to turn the unit on.
Move it to the off position to turn the unit off.
Press this button to start or interrupt the selected wash program, or to view the
program during a cycle.
In order to deactivate the function to the controls, to prevent altering cycle, press
and hold the “Extra Rinse” and “Delay Start” buttons.
Memory
button
Chime button
Delay Start
button
Color LED
Display
Extra Rinse
button
No Spin
button
Pre Wash
button
Program Dial
Start/Pause
button
Child Lock