OPERATOR INSTRUCTION MANUAL
IM_TFA_12TE_Rev03_A4
TFA12TE
FLANGE ALIGNMENT TOOL
3
2.
TOOL SAFETY
2.1
GENERAL SAFETY
These instructions cover the safe operation and
maintenance of THE EQUALIZER TFA12TE FLANGE
ALIGNMENT tool. The use of any tools should be as part
of a broader task-based risk assessment, which should be
carried out by the operation supervisor or other competent
person.
Failure to comply with the safety information contained
within this manual could result in personal injury or
equipment damage. Read all instructions, warnings and
cautions carefully, and follow all safety precautions.
The safety of the operator, any assisting personnel and
the general public is of paramount importance. Always
work in accordance with applicable national, local, site &
company-wide safety procedures.
2.2
PERSONNEL COMPETENCY
Only personnel deemed competent in the use of mechanical
and hydraulic equipment should use these tools.
2.3
DISCLAIMER
Equalizer cannot be held responsible for injury or damage
resulting from unsafe product use, lack of maintenance
or incorrect product and/or system operation. If in doubt
as to the safety precautions and applications, contact
Equalizer using the contact details at the back of this
manual.
1.
INTRODUCTION
The Equalizer™ TFA hydraulic flange alignment tool has
been developed to assist in the aligning of large flanges
on the inside of large pipes, for example those which
make up the tower sections of a wind-turbine.
The tool has been designed to cope with the larger loads
and dimensions associated with these flange joints while
remaining relatively lightweight and user-friendly.
It is essential that the users familiarise themselves with
the contents of this manual prior to using the tool.
This manual contains information for the following tools:
• TFA12TE External Hydraulic Flange Alignment Tool
Summary of Contents for TFA12TE
Page 27: ......
