EQUIPMENT SAFETY SYSTEMS
75 Naxos Way, Keysborough 3173 Victoria Australia
P: +61 3 8770 6555 E: [email protected]
Genie GEN-5 Series
Installation Manual
REV 2.0
24/09/2020
Model6253 OverWatch
™
Installation Manual
Document # DO001235
|
6 of 24
|
Installation Instructions
Operator Sensor
Step
Description
Diagram
1.
Drill two 5.0mm holes to
mount the operator sensor in
the position shown in the
diagram.
The sensor should be
mounted at an angle of 40
degrees.
Drill a 4.0mm hole for the P-
Clip installation.
2.
Mount the Operator Sensor in
the located position using the
supplied angled wedges,
sensor guard, M4 washers,
nuts and bolts.