72
73
In the MAX! Room Solution, all settings of the MAX!
Radiator The are made via the MAX! Wall
The.
If you use the MAX! Radiator The in the
MAX! Radiator Solution, please proceed as follows:
•
Press the Auto/Mode button for more than 3 seconds. The
display will show “Pro”. Confirm this with the Boost button.
•
The display will show “dAy”. With the handwheel choose
a single weekday, all weekdays, the weekend or the en-
tire week (example: weekdays).
• Confirm with the Boost button.
• Now set the end time of the first time period (example:
6:00 o‘clock for the period 0:00 – 6:00 o‘clock).
• Confirm with the Boost button.
•
With the handwheel select the chosen temperature for
the previously chosen time period (example: 17.0°C).
• Confirm with the Boost button.
•
Repeat this procedure until temperatures are stored for
the entire period between 0:00 and 23:59 o‘clock.
In Auto mode, the temperature can be changed via the
handwheel or the comfort/set-back button ( ) at any time.
However, the changes will only be maintained until the next
change setting of the week programme.
Week programme: examples
For each day of the week up to 6 heating phases (13 change
settings) with individual temperature settings can be sa-
ved with the MAX! Radiator The. The factory set-
tings are as follows:
Monday - Friday:
from 00:00 to 06:00 17.0°C
from 06:00 to 09:00 21.0°C
from 09:00 to 17:00 17.0°C
from 17:00 to 22:00 21.0°C
from 22:00 to 23:59 17.0°C
The display will show bars for those heating phases where
the set temperature for the period is higher than the saved
set-back temperature. In the example above, no bars are
displayed for the phase between 0:00 and 6:00 o‘clock.
Only for the phases from 6:00 until 9:00 and 17:00 until
23:00 o‘clock bars are shown in the display.
If you want to heat a room e.g. also during midday, a week
programme could be configured as follows:
