Epygi Technologies
Configuring Quadro with ISDN
Fig. 9: ISDN Wizard – Page 2 (DDI is disabled)
6.
Radi
oose the
ould be
etc.) are
and all
Route
is list in
o button selections on this page allow to configure the ISDN bus and to ch
MSN configuration:
•
No other devices are connected to ISDN bus - this selection sh
selected if no other devices (ISDN PBX, PCI card, FAX, ISDN phone,
connected to the same ISDN bus. For this selection, MSN configuration
incoming calls are routed to the same destination defined from the
Incoming call To drop down list. See the description of the values in th
the step 4 of the
ISDN trunk configuration using DDI
chapter.
•
Other devices are connected to ISDN bus – this selection should be selected if
any other devices (ISDN PBX, PCI card, FAX, I
the network.
7.
MSN Service
ed to ISDN
bus
table, press the MSN
Service
defined.
SDN phone, etc.) are connected to
the same ISDN bus. For this selection, MSN table should be configured manually.
Attention:
It is recommended to choose Other devices are connected to ISDN
bus in case of several subscribed numbers and multiple ISDN devices in
configuration is only needed if the Other devices are connect
radio button has been selected on this page. To configure MSN
link. This will open a page where a table with MSN numbers should be
Fig. 10: ISDN Wizard – MSN Service Configuration
7.1.
Press Add button on the MSN Service page to add a new MSN Number. This will open a
page where MSN number and the corresponding destination to route incoming call to
should be defined.
PAGE 10
7-Feb-06
