052715-JA
www.EPVscreens.com
7
Installation
1.
Locate your desired installation location with a stud finder (recommended) and mark the drill-hole
area of where the screen is to be installed.
2.
Drill a hole with the proper bit size according to the wood screws included.
3.
Line up the wall brackets with the drilled holes on the installation location and screw them in using a
Phillips screwdriver.
Note: Use 2 top wall brackets on diagonal sizes below 135”, and use 3 top wall brackets on
diagonal sizes 135” and above.
4.
Position the fixed frame screen onto the top wall brackets as shown in
Fig. 18
and push down at the
center of the bottom frame to secure the installation.
5.
The design of the wall brackets allows the frame to slide over them through its sides. This is an
important feature of the installation design as it allows your screen to be properly centered.
6.
Using both hands finish the installation by pushing the lower portion of the fixed frame screen into
the lower bracket as shown in
Fig. 19
.
CAUTION
Please follow these instructions carefully to ensure proper maintenance and safety of your Screen.
1. When hanging the screen up, please make sure that no other objects such as power switches, outlets,
furniture, ladders, windows, etc. occupy the space designated for your Fixed-Frame screen.
2. Regardless if the screen is hung on or installed into the wall, make sure that the proper mounting anchors
are used and that the weight is supported appropriately by a strong and structurally sound surface just as any
large and heavy picture frame should.
(Please consult a home improvement specialist for the best advice on installation)
3. Frame parts are made of high quality velour-surfaced aluminum and should be handled with care.
4. When not in use, cover over the screen with a furniture sheet to protect it from dirt, grime, paint or any
other impurities.
5. When cleaning, use a damp soft cloth with warm water to remove any marks on the frame or screen
surface.
6. Never attempt to use any solutions, chemicals or abrasive cleaners on the screen surface.
7. In order to avoid damaging the screen, avoid touching it directly with your fingers, tools or any other sharp
or abrasive objects.
8. Spare Parts should be placed out of reach of small children in accordance with household safety guidelines.
For a local Elite Prime Vision contact or Technical Support, please visit
www.EPVscreens.com
(Fig. 18)
(Fig.19)
