052715-JA
www.EPVscreens.com
2
FRAME ASSEMBLY
1. Insert the
center joint (c)
connector to the horizontal frame piece with bevel connection and flat head,
and then fasten it with two
M5x15 screws (h)
.
2.
Insert the other horizontal frame piece to the
center joint
connector and then fasten it with two
M5x15
screws
.
Note: a. 2 long frames should be assembled for a screen.
b. Do not tighten the screws completely until all frame pieces have been assembled correctly.
3. Insert both
elbow joint
connectors into the long horizontal frame and then fasten it with two
M5x15 screws
(seeFig.1).Then insert the short frames and fasten them with screws (Fig.1.2).
Flat head
bevel connection
Bevel connection
Flat head
×2
½ Long Frame
½ Long Frame
Push
Horizontal Long Frame
M5x15 Screw
M5x15 screws
M5x15 screws
