3.
Turn the printer on while holding the
y
button down, and then release the buttons when the power light
flashes.
The nozzle check pattern is printed.
Note:
It may take some time to start printing the nozzle check pattern.
4.
Examine the printed pattern.
❏
If you cannot see any broken lines or missing segments as in the following "OK" pattern, the nozzles are not
clogged. Print head cleaning is not necessary.
❏
If there are broken lines or missing segments as shown in the "NG" pattern, the print head nozzles may be
clogged. Go to the next step.
5.
Hold the
y
button down for five seconds until the power light starts flashing.
Print head cleaning starts.
Note:
It may take some time to start print head cleaning.
>
Checking and Cleaning the Print Head
>
Checking and Cleaning the Print Head - Pri
92