1.
Place the originals.
By placing multiple originals on the scanner glass, you can scan them all at the same time. Make sure there is a
gap of at least 20 mm between the originals.
Note:
You cannot use ADF when scanning from
Photo Mode
.
2.
Start Epson Scan 2.
3.
Select
Photo Mode
from the
Mode
list.
4.
Make the following settings on the
Main Settings
tab.
❏
Image Type: Select the color for saving the scanned image.
❏
Resolution: Select the resolution.
Note:
The
Document Source
setting is fixed as
Scanner Glass
, and the
Document Type
setting is fixed as
Reflective
.
(
Reflective
means originals which are not transparent, for example ordinary papers or photos.) You cannot change these
settings.
>
>
125