277
• Load paper in the cassette printable side down.
• Follow any special loading instructions that came with the paper.
Note:
Your product will not operate properly while tilted at an angle. Place it on a flat, stable surface
that extends beyond the base of the product in all directions.
• Clean the paper rollers.
• Operate your product in the recommended environmental conditions.
Parent topic:
Related references
Paper Jams Inside the Product
Paper Loading Capacity
Paper Specifications
Related tasks
Originals Do Not Feed From the Automatic Document Feeder
If your originals do not feed when placed in the ADF, try these solutions:
• Make sure the
ADF
icon lights up on the Copy, Fax, or Scan screen on the LCD screen. If not, reload
the originals.
• Make sure the size, weight, and number of your originals are supported by the ADF.
• Make sure the originals are loaded correctly.
• Make sure the document is not curled or creased.
• Try cleaning the inside of the ADF.
• Do not load originals above the arrow mark on the ADF edge guide.
Summary of Contents for WorkForce ST-C4100
