E
Slide the edge guides to the edges of the paper.
F
Keep the cassette flat and insert it back into the product carefully and slowly.
G
Slide out the output tray and raise the stopper.
Note:
❏
After loading paper, set the paper size for each paper source. Paper is fed from the appropriate paper source depending
on the setting. Use the panel utility to set the paper size.
&
“Paper Size Loaded Setting” on page 66
❏
When using Legal-size paper, lower the stopper (*).
❏
Leave enough space in front of the product for the paper to be fully ejected.
❏
Do not remove or insert the paper cassette while the product is operating.
Into the rear MP tray
Follow these steps to load paper:
User’s Guide
Paper Handling
20
