Epson WorkForce Pro WF-C879R User Manual Download Page 486

Page: 486 / 576

Confirming that Network Scan is Enabled

You can set the network scan service when you scan from a client computer over the network. The default setting is
enabled.

Access Web Config and select the

Scan/Copy

tab >

Network Scan

Make sure that

Enable scanning

EPSON Scan

is selected.

If it is selected, this task is completed. Close Web Config.

If it is cleared, select it and go to next step.

Click

Next

Click

The network is re-connected, and then the settings are enabled.

Related Information

“Running Web Config on a Web Browser” on page 374

Making Fax Features Available (Fax-Capable Printers Only)

Before Using Fax Features

Check the following before you start using the fax features.

❏

The printer and the phone line, and (if it is being used) the phone machine are connected correctly

❏

Fax basic settings (Fax Setting Wizard) is complete

❏

Other necessary Fax Settings are complete

“Connecting the Printer to a Phone Line” on page 487

“Making the Printer Ready to Send and Receive Faxes” on page 490

“Making Settings for the Printer's Fax Features According to Use” on page 492

“Fax Settings (Fax-Capable Printers Only)” on page 386

“Configuring a Mail Server” on page 452

“Setting a Shared Network Folder” on page 456

“Making Contacts Available” on page 472

See the following for information on adding optional faxes to the printer.

“Fax Board (Super G3/G3 Multi Fax Board)” on page 340

If your organization has a printer administrator, contact your administrator to check the status or conditions of the
connection and settings.

Related Information

“Report Settings” on page 398

Administrator Information

Settings to Use the Printer

Making Fax Features Available (Fax-Capable Printe

…

486

Summary of Contents for WorkForce Pro WF-C879R

































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for WorkForce Pro WF-C879R

Reviews:

Brands by name

Popular brands

Epson WorkForce Pro WF-C879R, User Manual

Search results

Summary of Contents for WorkForce Pro WF-C879R

Reviews:

Brands by name

Popular brands