Epson WorkForce Pro WF-C879R User Manual Download Page 452

Page: 452 / 576

Items

Explanation

Enable AirPrint

IPP, Bonjour, AirPrint (Scan service) are enabled, and IPP is established only with
secure communication.

Configuring a Mail Server

Set the mail server from Web Config.

Check below before setting up.

❏

The printer is connected to the network that can access the mail server.

❏

Email setting information of the computer that uses the same mail server as the printer.

Note:

❏

When you use the mail server on the Internet, confirm the setting information from the provider or website.

❏

You can also set the mail server from the printer’s control panel. Access as below.

Settings

General Settings

Network Settings

Advanced

Email Server

Server Settings

Access Web Config and select the

Network

tab >

Email Server

Basic

Enter a value for each item.

Select

The settings you have selected are displayed.

When the setup completes, perform the connection check.

Related Information

“Running Web Config on a Web Browser” on page 374

Administrator Information

Settings to Use the Printer

Configuring a Mail Server

452

Summary of Contents for WorkForce Pro WF-C879R

































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for WorkForce Pro WF-C879R

Reviews:

Brands by name

Popular brands

Epson WorkForce Pro WF-C879R, User Manual

Search results

Summary of Contents for WorkForce Pro WF-C879R

Reviews:

Brands by name

Popular brands