Epson WorkForce DS-40, User Manual

Page: 29 / 89

• Select the Enter address setting, type in the IP address or host name of your scanner, and click
OK .
5. Click the Test button to check the connection.
You see a confirmation message.
6. Click OK to save your settings and close Epson Scan Settings.
Determining the Scanner's IP Address
Parent topic: Connecting to an Existing Wi-Fi Network
Determining the Scanner's IP Address
If you have multiple scanners on your network, you need to know the IP address of the scanner when
setting up network scanning.
1. Do one of the following to start EpsonNet Config:
• Windows 8.x : Navigate to the Apps screen and select EpsonNet Config .
• Windows (other versions) : Click or Start , and select All Programs or Programs . Select
EpsonNet > EpsonNet Config > EpsonNet Config .
• OS X : Open the Applications folder and select EPSON Software > EpsonNet > EpsonNet
Config > EpsonNet Config .
2. Find your scanner in the list and write down the IP address.
Parent topic: Setting Up Network Scanning
Direct Wi-Fi Mode Setup
You can set up your scanner to communicate directly with your computer or another device without
requiring a wireless router or access point. If your product is not already connected to a wireless
29