❏
IPv6 Address
❏
Enable
Select this when using an IPv6 address.
❏
Disable
Select this when using an IPv4 address.
❏
Link Speed & Duplex
Select an appropriate Ethernet speed and duplex setting. If you select a setting other than Auto, make sure the
setting corresponds to the settings on the hub you are using.
❏
Auto
❏
10BASE-T Half Duplex
❏
10BASE-T Full Duplex
❏
100BASE-TX Half Duplex
❏
100BASE-TX Full Duplex
❏
Redirect HTTP to HTTPS
❏
Enable
Enables the redirect function for HTTP to HTTPS.
❏
Disable
Disables the redirect function for HTTP to HTTPS.
❏
Disable IPsec/IP Filtering
Disables the IPsec/IP filtering function if you cannot connect to the printer because of the security settings.
❏
Disable IEEE802.1X
Disables the IEEE802.1X function if you cannot connect to the printer because of the security settings.
❏
-iBeacon Transmission
❏
Enable
Enables the iBeacon transmission function.
❏
Disable
Disables the iBeacon transmission function.
Checking the Network Connection Status
You can check the network connection status in the following way.
User's Guide
Network Settings
63