Epson WF-B4023 User Manual Download Page 71

Page: 71 / 106

• If multiple pages feed at once, remove the paper, fan the edges to separate the sheets, and reload it.

• Do not load more than the recommended number of sheets.

• If paper jams when you print on both sides of the paper, try loading fewer sheets.

• For best results, follow these guidelines:

• Use new, smooth, high-quality paper that is not curled, creased, old, too thin, or too thick.

• Load paper in the cassette printable side down.

• Follow any special loading instructions that came with the paper.

Parent topic:

Solving Paper Problems

Related references

Paper Jam Problems Inside the Product
Paper Jam Problems in the Cassette
Paper Jam Problems in the Duplexer
Paper Loading Capacity

Related topics

Loading Paper

Paper Jam Problems Inside the Product

If paper has jammed inside the product, try these solutions:

1. Cancel the print job from your computer, if necessary.

2. Open the front cover.

Summary of Contents for WF-B4023











































































































Search results

Summary of Contents for WF-B4023

Reviews:

Related manuals for WF-B4023

Brands by name

Popular brands

Epson WF-B4023, User Manual

Search results

Summary of Contents for WF-B4023

Reviews:

Related manuals for WF-B4023

Brands by name

Popular brands