Part 4.
Error LED is Lit or Flashing.
Start
Are the connectors to
the printer hooked up
correctly?
Hook up connectors correctly.
The easiest way to do this is to remove
the connectors, while the power is off,
and re-connect them.
OK?
END
Yes
No
Is the paper type
selected correctly by
DIP switch?
Turn the printer power off and change the DIP switch
settings to the proper setting for the type of paper
being used. (See the end of this document for the
appropriate settings)
OK?
END
Yes
No
Has the printer
recovered from
the error?
Reset the printer by switching it
off for at least 30 seconds.
Wait for the print head
temperature to drop if excessive.
Return unit to PC-PoS.
Beyond Local Repair.
END
No
No
Yes
Yes
