manualshive.com logo in svg

Epson TM-U950P - B/W Dot-matrix Printer, Technical Manual

The Epson TM-U950P is a reliable and efficient B/W dot-matrix printer suitable for various businesses. Enhance your understanding of its features and functionalities with the comprehensive Operator's Manual provided for free download at manualshive.com. Get the most out of your printer experience by accessing this valuable manual today.

Share
Download
background image

Confidential

CONFIDENTIALITY AGREEMENT

BY USING THIS DOCUMENT, YOU AGREE TO ABIDE BY THE TERMS OF THIS 
AGREEMENT. PLEASE RETURN THIS DOCUMENT IMMEDIATELY IF YOU DO NOT AGREE 
TO THESE TERMS. 

1. This document contains confidential, proprietary information of Seiko Epson Corporation or 

its affiliates. You must keep such information confidential. If the user is a business entity or 
organization, you must limit disclosure to those of your employees, agents and contractors 
who have a need to know and who are also bound by obligations of confidentiality. 

2. On the earlier of (a) termination of your relationship with Seiko Epson, or (b) Seiko Epson’s 

request, you must stop using the confidential information. You must then return or destroy 
the information, as directed by Seiko Epson. 

3. If a court, arbitrator, government agency or the like orders you to disclose any confidential 

information, you must immediately notify Seiko Epson. You agree to give Seiko Epson 
reasonable cooperation and assistance in resisting disclosure. 

4. You may use confidential information only for the purpose of operating or servicing the 

products to which the document relates, unless you obtain the prior written consent of Seiko 
Epson for some other use. 

5. Seiko Epson warrants that it has the right to disclose the confidential information. SEIKO 

EPSON MAKES NO OTHER WARRANTIES CONCERNING THE CONFIDENTIAL 
INFORMATION OR ANY OTHER INFORMATION IN THE DOCUMENT, INCLUDING 
(WITHOUT LIMITATION) ANY WARRANTY OF TITLE OR NON-INFRINGEMENT. 
Seiko Epson has no liability for loss or damage arising from or relating to your use of or 
reliance on the information on the document. 

6. You may not reproduce, store or transmit the confidential information in any form or by any 

means (electronic, mechanical, photocopying, recording, or otherwise) without the prior 
written permission of Seiko Epson. 

7. Your obligations under this Agreement are in addition to any other legal obligations. Seiko 

Epson does not waive any right under this Agreement by failing to exercise it. The laws of 
Japan apply to this Agreement. 

Summary of Contents for TM-U950P - B/W Dot-matrix Printer

































































































































































































































































Reviews:

No comments

Related manuals for TM-U950P - B/W Dot-matrix Printer

Canon CX-G2400 Basic Operation Manual preview
CX-G2400
Brand: Canon Pages: 58
Canon image Prograf iPF680 Series Basic Manual preview
image Prograf iPF680 Series
Brand: Canon Pages: 132
Canon i470D Series Printing Manual preview
i470D Series
Brand: Canon Pages: 44
Canon imageClass LBP6230dw Getting Started preview
imageClass LBP6230dw
Brand: Canon Pages: 16
Canon i960 Series Printing Manual preview
i960 Series
Brand: Canon Pages: 2
Canon imageprograf IPF785 Service Manual preview
imageprograf IPF785
Brand: Canon Pages: 42
Canon CX 320 User Manual preview
CX 320
Brand: Canon Pages: 148
Canon Color Bubble Jet BJC-8200 Quick Start Manual preview
Color Bubble Jet BJC-8200
Brand: Canon Pages: 6
Canon Color Bubble Jet BJC-1000 Series Specification preview
Color Bubble Jet BJC-1000 Series
Brand: Canon Pages: 2
Canon BJC-S530D Start Here preview
BJC-S530D
Brand: Canon Pages: 2
Canon BJC-S520 Setup Instructions preview
BJC-S520
Brand: Canon Pages: 2
Canon Color Bubble Jet BJC-8200 Service Manual preview
Color Bubble Jet BJC-8200
Brand: Canon Pages: 105
Canon i9900 Series Start Here preview
i9900 Series
Brand: Canon Pages: 2
Canon i900D Series Quick Start Manual preview
i900D Series
Brand: Canon Pages: 68
Canon i900D Series Printing Manual preview
i900D Series
Brand: Canon Pages: 4
Canon i900D Series Setup Instructions preview
i900D Series
Brand: Canon Pages: 2
Canon i80 Series Setup Instructions preview
i80 Series
Brand: Canon Pages: 2
Canon imagePROGRAF iPF830 Setup Manual preview
imagePROGRAF iPF830
Brand: Canon Pages: 16

Brands by name

Popular brands

Load more brands