Epson TM-T83II, Technical Reference Manual

Page: 29 / 178

29
Chapter 2 Setup
2
Hanging the Printer on a Wall
To ha ng t he pr int er o n t he wall, follow t he s t eps below.
1
Attach the included control panel label for vertical installation on the roll
paper cover.
2
Install 2 screws (screw diameter: 4 mm {0.16"}, head diameter: 7 to 9 mm
{0.28 to 0.35"}) in the wall at an interval of 80 mm {3.15"}.
Make s u re t he le ngt h of t he screw's body in t he wall i s 10 mm {0.39"} or more, a n d t he le ngt h
o ut s i de t he wall i s 3 t o 4 mm {0.12 t o 0.16"}.
•
To fix the printer securely, install the wall hanging bracket on a wall made of wood, concrete,
or metal. The thickness of the wall should be 10 mm {0.4"} or more.
•
Be sure to use metallic screws.
•
The screws on the wall side must have a pull-out strength of 150 N (15.3 kgf) or more.
Control panel label
for vertical installation