Epson TM-T83II, Technical Reference Manual

Page: 110 / 178

110
5
Press the Feed button for less than 1 second the number of times as shown
in the print result and then hold down for more than 1 second to select the
item to be set.
The spec i f i ed val u e (op ti o n ), c u rre nt ly se t val u e, a n d initi al val u e for t he selec t ed it em are
pr int ed.
6
Select the setting value by pressing the Feed button for less than 1 second
the corresponding number of times and confirm it by holding down the
button for more than 1 second.
Af t er t he se tting s are saved, t he Sof t ware Se tting Mode gui da n ce i s pr int ed a n d Paper LED
flashes.
For some
it ems, it em selec ti o n co ntinu es before pr inting t he val u es.
For de t a i ls o n t he se tting it ems, see "Se tting I t ems for Sof t ware Se tting Mode" o n pa g e 131 .
7
To exit the Software Setting Mode, turn off the printer, or select "Exit" to return
to the mode selection guidance and then select "Exit and Reboot Printer".
•
To select the item No. "0", keep pressing the Feed button until the printer starts printing.
•
If the button is pressed the number of times that is not shown on the guidance, the operation
is invalid and the same guidance is printed.