Epson TM-T70II, Technical Reference Manual

Page: 45 / 156

Chapter 2 Setup
45
2
Y connection (only for models with a customer display (DM-D) connector)
Th i s pr int er i s co nn ec t ed t o t he hos t comp ut er v i a t he ser i al por t . Whe n a c u s t omer d i splay
(DM-D) i s t o be co nn ec t ed, co nn ec t it t o t he pr int er v i a t he mod u lar cable.
Connecting the serial interface (RS-232) cable
1
Insert the interface cable connector firmly into the interface connector
on the connector panel.
2
When using connectors equipped with screws, tighten them to secure
the connectors firmly.

Make sure to pull out the power cable before connecting cables.

When connecting a customer display to the printer, connect the modular jack from the
customer display to the DM-D connector.

Set the communication conditions of the customer display as follows:

Baud rate: 19200 bps

Bit length: 8-bit

Parity: no parity

Stop bit: 1
WARNING
Be sure to turn off the power supply for both the printer and host computer before
connecting the cables.
Modular cable
Modular cable
DM-D
Cash drawer
TM-T70II
Serial cable
AC a AC cable