33
Chapter 3 Using the Printer Driver
3
4
Change the size of the logo image. The size can be changed by dragging the knobs on the
four corners of the logo image in the preview screen.
5
Edit the logo image.
6
After editing the logo image, click the [Register] button to save the logo.
Click the [Test Print Registered Logo] button to test-print the registered logo. Click the [Unregister] button to
cancel the registration of the logo.
7
When setting a logo in multiple positions, repeat steps 2 to 6.
Setting
Description
Layout
Specifies [Left], [Center], or [Right] for the logo position.
Rotate by 180
Degrees
When this is selected, the logo is rotated 180 degrees. Only the
image is rotated, the logo insertion position does not change.
Grayscale
Specifies the grayscale setting. Selects [Multi-tone] or
[Monochrome].
Paper width
Sets the paper width. Select [80 mm] or [58 mm] as appropriate
for the printer paper size.
Brightness
Moves the slide bar to set the brightness.
Summary of Contents for TM-T70 II
Page 34: ...34 ...
