Epson TM-H6000II, Technical Reference Manual

Page: 84 / 122

3-30
Setup Rev. A
1. Install EPSON Advanced Printer Driver
Execute the installer “ADT###e.exe,“ and select modules which you need. The
recommended modules are shown below. Refer the installation manual for details.
Note:
For About Each Manual, Sample program, and each utility, you have to download separately the
ADT###e.exe.
2. Install “USB driver”
When you use USB interface model printer, you need to install “USB driver.” The procedure
depends on the OS; therefore see the install manual. If you aren’t using a USB interface
model printer, you don’t need to install this module.
3. Install “EPSON Net Direct print“
When you use the Ethernet interface model printer with Windows98/95, you need to install
“EPSON Net Direct print.” See the installation manual for details. If you aren’t using the
Ethernet interface model printer, or aren’t using Windows 98/95, you don’t need to install
this module.
4. Setup the printer port
After installing APD (and “USB driver” or “EPSON Net Direct print“) you need to adjust the
printer port setting for the printer interface model. See the Installation manual and the
User’s manual for details.
Note:
When you use the serial interface model printer, you need to adjust serial communication setting
between printer and printer driver. See “Serial interface model” on page 3-21 for information on the
settings.
5. Test print
Execute test print from the “property” of printer to confirm the setting. If the test print is not
correct, please see the “Notes” on the “User’s Manual” and “Status API Reference Manual”
to solve the your problem.
Note:
You can use the printer with sample program (written in Microsoft Visual Basic, Visual C++). The
sample program is provided separately.
EPSON TM-H6000 Slip:
This module (printer driver) is need for printing on slip.
EPSON TM-H6000 Receipt:
This module (printer driver) is need for printing on
receipt.
EPSON TM-H6000 Reduce35:
This module (printer driver) is usable for printing A4 size
document on receipt with reduction.
Status API:
This module is need for monitoring the printer. This
module provides API to monitor the printer’s status.
USB driver:
This module (device driver) is need for the USB interface
model printer.