n
Connecting the host computer to the TM-U300PC/U300PD
Connect the interface cable as follows:
➀
Turn off the printer and the host ECR (host computer).
➁
Plug the parallel interface cable connector into the printer’s interface connector.
➂
Squeeze the wire clips together until they lock in place on both sides of the
connector.
➃
Secure the frame ground cable and the shield wire of the parallel interface
cable with the frame ground screw on the bottom of the printer.
➄
Plug the drawer kick-out cable connector into the printer's drawer kick-out con-
nector. (You can remove the drawer kick-out cable by pressing in the
connector’s clip and pulling out the connector.)
rawer Kick-out Connector
Kick-out Cable
7
