Epson SureColor F2100 Series User Manual Download Page 144

Page: 144 / 204

144

Wipe the metal border on the right of the flushing pad.

Dry off the areas that you cleaned using a dry, soft cloth.

Close the printer cover.

Turn on the printer and perform a nozzle check.

Parent topic:

Maintenance

Related tasks

Performing a Nozzle Check

Storing the Printer

If you will not use the printer for an extended period of time with the power off, you must properly prepare
it for storage. You must change the ink cartridges to cleaning cartridges if the planned period of non-
operation is one month or more.

Caution:

If you do not change the ink cartridges to cleaning cartridges before storing the printer, it may

be impossible to clear clogs in the print head when the printer is turned back on.

Summary of Contents for SureColor F2100 Series













































































































































































































Search results

Summary of Contents for SureColor F2100 Series

Reviews:

Related manuals for SureColor F2100 Series

Brands by name

Popular brands

Epson SureColor F2100 Series, User Manual

Search results

Summary of Contents for SureColor F2100 Series

Reviews:

Related manuals for SureColor F2100 Series

Brands by name

Popular brands