Epson Stylus WorkForce 30 Getting Started Manual Download Page 54

Page: 54 / 64

Sawgrass Technologies, Inc.

~ www.sawgrassink.com

HINT

After you have the

ColorSure Palette

loaded into

CorelDraw

, move the

cursor over each color. As the cursor hovers over each different color,

the

ColorSure Name

is displayed in the status area below each color.

III. Designing Your Artwork

By picking colors from the ColorSure palette, you will be able to consistently reproduce

colors in a reliable manner. To assist you in designing your artwork, ChromaBlast

ColorSure & ChromaBlast WorkForce 30 installs three palettes: two for Adobe products

and one for Corel products. These colors match the palette that is printed from within

ChromaBlast ColorSure and the ChromaBlast WorkForce 30.

• To open the

ColorSure Palette

Corel

, and

, choose

Window

> Color Palettes > Open Palette

. Select the file

“ColorSure PaletteCorel.cpl”

• To open the

ColorSure Palette

Adobe Illustrator

, (

Colorsure Palette.aco

)

choose

Window > Swatch > Libraries > Other Library

. Navigate to its

Installation

Destination

set during

WorkForce 30

installation:

C:\Program Files \Sawgrass

\WorkForce 30 \Adobe Illustrator

and hit

Open

. For easier access to the

Palette

File

, copy it from this installation path to

Illustrator10 \Presets \Swatches

and

it will show up in your

Drop-down

list directly under the

Swatch Libraries Menu

Other versions of

Illustrator

will have similar steps.

• To open the

ColorSure Palette

Adobe PhotoShop

, (

Colorsure Palette.aco

)

choose the

“Swatches Palette”

, click the option arrow on the palette, (

Point 1

choose

Replace Swatches

, (

Point 2

), and pick the

“Colorsure Palette.aco

file.

IV. Using Color Finder

After printing and transferring the

ColorSure Palette

, you see that you have an array

of colors to work with. There will be times, however, when the color you need is not

included in the

ColorSure Palette

. This is where the

Color Finder Tool

comes in handy.

The

Color Finder Tool

allows you to start with a specific color (e.g. navy blue) and find

similar colors in the same family by adding and subtracting up to three colors called

Summary of Contents for Stylus WorkForce 30

































































Search results

Summary of Contents for Stylus WorkForce 30

Reviews:

Related manuals for Stylus WorkForce 30

Brands by name

Popular brands

Epson Stylus WorkForce 30, Getting Started Manual

Search results

Summary of Contents for Stylus WorkForce 30

Reviews:

Related manuals for Stylus WorkForce 30

Brands by name

Popular brands