Epson Stylus Pro 9000, Printer Manual

Page: 62 / 165

3-7
Maintaining and Transporting the Printer | 3-7
Replacing Ink Cartridges
When one of the
Ink Out
lights is flashing (and
INK LOW
is displayed on
the control panel), the corresponding cartridge is almost out of ink. Make
sure you have a replacement cartridge. When the light stays on and
INK
OUT
is displayed, the cartridge is empty. You must replace the cartridge
before you can continue printing. Use only the following EPSON ink
cartridges:
EPSON Stylus Pro 9000 graphic arts (dye-based) ink
EPSON Stylus Pro 9500 Archival (pigment) ink
Before you start, make sure the printer is on. Then follow these steps to
replace an ink cartridge:
1. Note the color of the
Ink Out
light that is on or flashing. This is the
cartridge that you need to replace.
2. Open the roll paper cover and locate the ink cartridge that needs
replacing.
•
Black T407011
•
Light cyan T412011
•
Cyan T410011
•
Light magenta T411011
•
Magenta T409011
•
Yellow T408011
•
Black T474011
•
Light cyan T479011
•
Cyan T477011
•
Light magenta T478011
•
Magenta T476011
•
Yellow T475011
Caution
For best results, use
genuine EPSON
cartridges and do not
refill them. Damage to
your printer attributable
to the use of other
consumables is not
covered by EPSON’s
warranty. Color accuracy
may vary if you use
non-EPSON inks.
Caution
Leave the empty
cartridge in the printer
until you are ready to
replace it.
black,
cyan,
magenta
light cyan,
light magenta,
yellow