Epson Stylus Pro 5000 - Print Engine, Product Information Manual

Page: 5 / 6

RIP Station 5000
3/98 RIP Station 5000
- 5
The available network types, and the Setup areas that pertain
to them, are summarized in the following table:
The following options appear when you select Port Setup on
the Network Setup menu:
The following options appear when you select Protocol Setup
on the Network Setup menu:
Color Setup (All defaults can be overridden from applications.)
RGB Source EFIRGB
sRGB (PC)
Apple Standard
Off
Selects color space for
conversion from screen
to printed output.
Default CRD Photographic
Presentation
Solid
Select Solid if you
want to use a press
simulation.
Press Simulation Cromalin EuroSTD
DIC
DuPont WaterProof
Euroscale
SWOP-COM M
SWOP-COM F
None
Japanese standard
European standard
3M MatchPrint
Fuji ColorArt
Save Changes Yes /No
Job Log Setup
Auto Print Job Log
Every 55 Jobs Yes/ No
Auto Clear Job Log
Every 55 Jobs Yes/ No
Job Log Page Size Tabloid/A3
Letter/A4
Save Changes Yes /No
Change Password
Clear Server Clears all spooled print
jobs and the Job Log.
For this network
or connection
type: Use this
port
setup: Use this
protocol
setup:
Use this service
setup:
AppleTalk over
Ethernet Ethernet
Setup AppleTalk
Setup AppleTalk printing
(PAP) is enabled
automatically.
TCP/IP over
Ethernet Ethernet
Setup TCP/IP Setup:
Ethernet Setup LPD Setup, Web
Services Setup
IPX/SPX over
Ethernet Ethernet
Setup IPS/SPX Setup PServer Setup
(NDS, Bindery, or
both)
Parallel Parallel
Port Setup — —
Setup menu
Setting Options Notes
Port Setup options
Setting Options Notes
Exit Port Setup
Ethernet Setup
Enable Ethernet Yes /No
Ethernet Speed Auto Detect
100 Mbps
10 Mbps
Parallel Port Setup
Enable Parallel Port No /Yes You can use both the
parallel port and
Ethernet.
Port Timeout in
Seconds 5–60 ( 5 )
Ignore EOF
Character Yes/ No Set to Yes if you want to
print PostScript files in
binary format.
Protocol Setup options
Setting Options Notes
Exit Protocol Setup
AppleTalk Setup
Enable AppleTalk Yes /No
AppleTalk Zone
TCP/IP Setup
Exit TCP/IP Setup
Ethernet Setup
Enable TCP/IP for
Ethernet Yes /No
IP Address Enter valid
address
Subnet Mask 255.0.0.0
255.255.0.0
255.255.255.0
Use if the IP address starts
with a number < 128
Use if the IP address starts
with a number from 128 to
191
Use if the IP address starts
with a number > 191
Gateway Setup
Gateway Address 127.0.0.1
IPX/SPX Setup
Select Frame Types Ethernet 802.2
Ethernet 802.3
Ethernet II
Ethernet SNAP Select all types used on
your network. For other
protocols, frame type is
automatically set.
Clear Frame Types