Epson Stylus CX3500 Series, Service Manual

Page: 43 / 206

EPSON Stylus CX3500/CX3600/CX3650/CX4500/CX4600 Revision A
PRODUCT DESCRIPTION Control Panel 43
1.6.3 Operations
1.6.3.1 Stand-alone Copy / Memory Card Print
The functions of this unit caused by each button in stand-alone copy mode or memory card print mode are described in the following table.
Table 1-44. Operations
Button
Function
Stand-alone Copy Memory Card Print (only for stylus CX4500/CX4600)
Power Button • Turn on or off this unit.
Ink Button
• Start or advance ink cartridge (I/C) exchanging procedure.
V
Case
T
[All inks are enough.] Move carriage (CR) to I/C exchange position.
T
[Ink low, Ink out, Without I/C error] Move CR to each color's ink check position if that color's I/C is ink low or ink out or without I/C. CR moves in the order of Cyan, Magenta, Yellow,
Black.
T
[CR is in some color's ink check position.] Move CR to next color's ink check position or I/C exchange position.
T
[CR is in I/C exchange position.] Move CR to standby position.
Ink Button
(Holding over 3
sec.) • Start cleaning head procedure.
• Invalid while printing, scanning, cleaning head, stopping printing or copying, exchanging I/C, or in error status except for paper out error, memory card error, index sheet error, PG error.
Memory Card
Button
(only for Stylus
CX4500/CX4600)
• Make transition from “Stand-alone copy” mode to “Memory card print” mode and select and
light “Print Index Sheet”, or “Print All / DPOF” if DPOF file exists in the card.
• Turn off both 7-seg. LED and “Fit to Page” LED.
• Select “Plain Paper” and “Letter (or A4)”
• Change to next “Memory card print” function.
V
Case
T
[Print Index Sheet] Change to “Print From Index Sheet”, and change paper type and
paper size to the one last set in “Print From Index Sheet” or “Print
All / DPOF”.
T
[Print From Index Sheet] Change to “Print All / DPOF”.
T
[Print All / DPOF] Change to “Print Index Sheet”, and change paper type and paper
size to “Plain Paper” and “Letter (or A4)”.
• Invalid while printing, scanning, cleaning head, stopping printing or copying, exchanging I/C, or in error status except for memory card error, index sheet error, PG error.
Copy Button
• Set number of copies incrementally and indicate it on 7-seg. LED.
V
Case
T
[1 to 8] Add 1 and the number becomes 2 to 9.
T
[9] Indicate “-”, which means 100 copies.
T
[-] Reset to “1”.
• Make transition from “Memory card print” mode to “Stand-alone copy” mode and set number of
copies to “1”.
• Invalid while printing, scanning, cleaning head, stopping printing or copying, exchanging I/C, or
in error status except for memory card error, index sheet error, PG error.
Paper Type Button
• Alternate paper type of “Plain Paper” and “Photo Paper”. • Alternate paper type of “Plain Paper” and “Photo Paper” which will be used in “Print From Index
Sheet” or “Print All / DPOF”.
• Invalid in “Print Index Sheet”, and then it is fixed to “Plain Paper”.
• Invalid while printing, scanning, cleaning head, stopping printing or copying, exchanging I/C, or in error status.