Mixed text/graphics mode
This feature is for software that has problems printing scalable
font text combined with graphics. Leave the mixed
text/graphics mode set to off unless you notice problems in
your printout.
Auto line feed
When the auto line feed feature is on, each carriage return (CR)
code is accompanied by a line feed
code. If your printed
text is unexpectedly double-spaced, set this feature to off. If
text lines print on top of each other, set it to on.
L oading position
When you want to print more lines on a page, set this feature
to 3 mm. For example, with
paper and the loading
position set to mm, you can print lines per page with
inch line spacing, but with the 3 mm setting you can print
lines. If you set the top margin in your software, that setting
is added to the default-setting value.
Changing
the default
settings
To change the printer’s default settings, you use the control
panel buttons; the control panel lights show your selections.
Follow the steps below to make your changes:
Make sure the printer is turned off and paper is loaded in
the paper feeder.
Hold down the
Pause
button and turn on the printer to
enter the default-setting mode.
Using Other Printer Functions 2-13
Summary of Contents for Stylus Color 400
Page 1: ...U S E R S GUIDE aa ...
