EPSON Stylus C66
3/04
EPSON Stylus C66
- 9
9. Look at the alignment sheet and select the pattern with no
gap or line between the rectangles. Enter the number for
that pattern in the corresponding box on the screen and
click
Next
.
If you can’t find an aligned pattern, choose the one that
looks the best. Then click
Realignment
to print another
test page and repeat this step.
10. Click
to print a black horizontal alignment sheet.Look
at the alignment sheet and select the pattern with no gap or
line between the rectangles. Enter the number for that
pattern in the corresponding box on the screen and click
Next
.
If you can’t find an aligned pattern, choose the one that
looks the best. Then click
Realignment
to print another
test page and repeat this step.
11. Click
Finish
to close the Print Head Alignment Utility.
Cleaning the Printer
To keep your printer working at its best, you should clean it
several times a year.
1. Turn off the printer, unplug the power cord, and
disconnect the printer cable.
2. Remove all paper, then use a soft brush to clean any dust or
dirt from the sheet feeder.
3. If the outer case or inside of the sheet feeder is dirty, clean it
with a soft cloth dampened with a mild detergent. Keep the
printer cover closed to prevent water from getting inside.
4. If ink accidentally gets inside the printer, wipe it off with a
damp cloth.
Warning:
Don’t touch the gears inside the printer.
Caution:
Never use a hard or abrasive brush, alcohol, or paint thinner for
cleaning; they can damage the printer components and case.
Don’t get water on the printer components and don’t spray
lubricants or oils inside the printer.
Transporting the Printer
If you need to ship your printer, you must prepare it for
transportation in its original box or one of a similar size.
Caution:
To avoid damage, remove the ink cartridges when transporting the
printer.
1. Turn on the printer.
2. Remove any paper from the printer, then remove the paper
support.
3. Press the
H
ink button. The print head moves to the ink
cartridge replacement position, and the
P
power light
begins to flash.
4. Open the printer cover.
5. Open the cartridge cover.
6. Pinch the back tabs of the cartridges as you lift them out of
the printer.
Warning:
If ink gets on your hands, wash them thoroughly with soap and
water. If ink gets in your eyes, flush them immediately with
water.
7. Close the cartridge cover and press the ink button. Wait
until the print head locks in the far right position, then turn
off the printer.
8. Unplug the power cord from the electrical outlet. Then
disconnect the printer cable from the printer.
9. Remove any paper from the printer and remove the paper
support.
10. Open the printer cover and secure the ink cartridge holder
to the case with tape.
Caution:
Be sure to remove the tape after installing the printer in its new
location.
11. Close the printer cover, push in the output tray extension,
then close the output tray.
Clean
here
