ADDENDUM
General Description
Stylus-800/1000 SERVICE MANUAL
1.1.2.2
Paper Handling Specification
Paper Feeding :
■
Friction
(either from built-in auto sheet feeder or manual insertion slot)
■
push tractor feed (from rear tractor unit (optional))
Note) Set the release lever to correct position to select proper feeding system.
1.1.2.3 Paper Specification
[With
Width :
182-420 mm (7.2 - 16.5”)
Note) When you use
A3
size paper in landscape orientation, both left
and right margin area becomes large since the
maximum
printable
width is limited up to 345 mm.
Length :
182-297 mm (7.2 -
Thickness :
0.065-0.11 (0.0026 - 0.0043”)
Weight :
-
-78
Quality :
Normal
paper, Bond paper
.
manual insertion slot]
<Envelope>
Width :
Length :
Thickness :
Weight :
Quality :
Size :
Thickness :
Weight :
Quality :
<Continuous
Width :
Thickness :
Weight
Quality :
Label size :
182-420 mm (7.2 - 16.5”)
182-420 mm (7.2 - 16.5”)
0.065-0.11 (0.0026 - 0.0043”)
52-90
(14 -
Normal
paper, Bond paper
#6 (W
X
L :
92 mm
x 3%”))
#10 (W L : 240
mm (9?4 x 4%”))
0.16-0.52 mm (0.0063 - 0.020”)
Note) The variation in thickness within printable area must be less than
0.25 mm (0.0098”).
g/m’ (I2 -
Normal
paper, Bond paper
101.6 -406.4 mm (4.0 -
0.065 -0.1 mm (0.0026 - 0.0039”)
52-82
(14 -
Normal
paper, Bond paper
63.5 x 23.8 mm (W x L/Minimum)
size :
101.6 -406.4 mm (4.0 - 16.0”)
:
Notes) 1.
2.
3.
4.
Less than
0.2
mm
(0.0078”)
including backing paper.
Equivalent of normal
paper
Label
can only be used under normal temperature condition.
Usable only with tractor feeding (requires optional tractor unit).
Do not perform any reverse feed.
Remove label form paper while the printer is not in use.
1 - 2
REV.-A
